Beverage Filling Machine Factory
Phone/WhatsApp: +86-18962226721
Choose By Bottles
You are here: Home » Products » face mask making machine » Semi Automatic Medical Face Mask Making machine
Share to:

Semi Automatic Medical Face Mask Making machine

Semi Automatic Disposable Surgical Medical Face Mask Making Machine is an Semi-Automatic mask production line with one set blank mask making machine and three sets of manual type mask ear loop outer welding machine. Every minute can produce 100-120 pcs of complete blank mask, mask specifications: 175*(80-100) mm three layers of non-woven filter type face mask.
  • NCR
  • New Crown Machinery
  • NCMR
semi face mask machinesemi mask machine

Equipment introduction
1.1 equipment overview:
This machine is mainly used for automatic forming of plane mask: the whole roll of cloth is driven by roller after being unrolled, and the cloth is folded and wrapped automatically.
1.2 equipment installation and configuration requirements
( 1 ) appearance color: international standard warm gray 1C (standard color), in the absence of special instructions according to this standard;
( 2 ) power supply: 220VAC±5 ‰, 50HZ, rated power of about 9KW;
( 3 ) compressed air: 0.5-0.7mpa, with a service flow of about 300L/min;
( 4 ) operating environment: temperature 10-35 ℃, humidity 5-35%HR, no combustible, corrosive gas, no dust
(cleanliness not less than 100,000).
5 operator: 1 person
Equipment can adapt to the incoming material and product case:
Name Hanging scroll number Width(mm) Outside diameter of roll (mm) Inner diameter of barrel (mm) Weight
Cloth 3 170~200 Φ600 Φ76.2 Max 15kg
Article the bridge of the nose 1 3~7 Φ400 Φ76.2 Max 25kg
Ear with 4 3 ----- ----- -----
The production specification:
Standard: 175*95mm
Equipment technical parameters:
4.1 equipment production capacity:
(1) production efficiency: 100-1 2 0ppm;
(2) equipment production qualification rate: 99% (except when incoming materials do not meet requirements or employees do not operate properly)
(3) equipment failure rate: 2% (refers to the failure caused by the equipment itself)
Equipment general configuration and standard requirements:
Configuration list of main components :
No. Name Brand Remark
1 Cylinder CKD, SMC/ Japan, adecker, like 1 cylinder
/ Taiwan

2 Solenoid valve CKD, SMC/ Japan, adecker
3 Servo motor Microsecond/China, mitsubishi/Japan
4 PLC Microsecond/China, mitsubishi/Japan
5 Bearing NSK/ Japan, sanyi/Korea
6 Line rail STAF, PMI, CPC/ Taiwan
7 Optical fiber amplifier Omron, keenz, panasonic/Japan
8 Touch screen Veron pass/kunlun pass state
9 Relay Omron/hequan
10 Button Double section


Muse.Jiang (Sales Manager):
0086- 189-6222-6721
Leo.Liu (COO)
Address: Zhenbei Road, Leyu Town, 
Zhangjiagang City, Suzhou, 
Jiangsu, China


Address: Zhenbei Road, Leyu Town, Zhangjiagang City, Suzhou, 
Jiangsu, China
Copyright © 2017 Zhangjiagang Yufeng Machine Co., Ltd.   All rights reserved.   Site Map